Black Jack Electric Caravan Jack 1600kg Trailer Jack Wiring Harness BJTJ-1001

Description

Description

Gone are the days of manually winding the jockey wheel to raise or lower the caravan or trailer.

The Black Jack™ Trailer Jack is the simplest, quietest and most advanced electric jack on the market today. Easy DIY installation and insanely simple RAISE\LOWER switch operation.

Hugely popular in the USA, the Black Jack™ now comes complete with the all-weather cover, and the Black Jack Clamp™ (Australian Patent Pending) allowing uses the ability to easily bolted to the Caravan or Trailer A-Frame.

For easier and faster deployment or retraction the Black Jack™ includes the Black Jack™ Folding Foot providing no more bending down to adjust the foot extension height position. Also included is the Black Jack™ Foot Pad giving improved stability on soft or unstable surfaces. 

For easy installation, all Black Jacks are pre-wired to an Andersen plug.

An installation wiring harness is also included with BJTJ- 1001. This harness includes a pre wired Andersen plug at one end and an inline fuse and battery terminals at the other end. The 5 meters of positive and negative Number 8 wires are encased in a protective cover.  



BLACK JACK TRAILER JACK KEY FEATURES:
• 1600 kg lifting capacity, more than enough muscle
• Robust 58 mm outer post built for the toughest conditions (normal jockey wheels are only 48mm)
• Massive 560 mm stroke that will lift the caravan clear of the tow vehicle hitch in any conditions
• Built in level indicator to easily adjust the caravan level after you unhitch
• Removable foot pad extension for travelling
• Tough powder coated finish
• Pre wired to an Andersen plug 
• Emergency crank handle included as an emergency back up
• Built in night light for operating after hours
• 12 volt 28 amp DC power plugs directly to 12 volt battery
• Free installation kit included, easy DIY Installation (with BJTJ – 1001)
• Free all weather cover to keep the rain out
• Total weight including Black Jack Clamp 17 kg
BLACK JACK Clamp  KEY FEATURES:

• 6 different chassis bolt hole positions so it fits any Caravan or trailer A-Frame in Australia (6 inch, 5 inch, 4 inch or 3 inch)
• Multiple top hole positions so the Black Jack can be installed facing the front, the side or the rear of the Caravan or trailer. Your choice!
• Panel recess so you can install over the top of existing wire fittings maximizing the options of where to install on the A-Frame.
• Safety chain insert hole so you can hang safety chains on the Black Jack Clamp.
• Upper support and a lower support brackets designed to eliminate any lateral movement that may be caused by uneven surfaces.
• Easy bolt installation. No additional modifications, welding or tools are required.
• Tough powder coated finish
• Australian Patent Pending (No. 2020902039)
• Registered Australian Design
• Assembled in Australia supporting Australian Jobs

Kit Includes：
1x Black Jack Electric Trailer Jack
1x Black Jack Clamp Patented 
1x Black Jack Folding Foot 
1x Black Jack Foot Pad 
1x Black Jack All Weather Cover 
1x Black Jack Upgraded Harness ( Ready to use)



Specifications

  • Brand BLACK JACK
  • AMPS 28 amp
  • Warranty 3 Year
  • Product Type Jacks
  • Manufacturer Part Number BJTJ-1001
  • Maximum Load Capacity 1600 kg
  • OUTER POST DIAMETER 58MM
  • Unit Quantity 1
  • Overall Dimensions H 781 x W 216 x D 140mm

We offer the very best in hot dipped galvanised trailers and trailer parts, whatever you are looking for we can do it!

 We manufacture and assemble quality trailers, which meet the Australian standard. All our trailer is Australian designed and all the parts are ADR approved. We storage all the big local brand trailer parts. This is the best one stop shop for your trailer and accessories. With the skills of our staff and the many options available, we can manufacture trailers to suit the individual needs of our customers.

 Towing Project can also offer a wide variety of trailer parts to ensure your trailer is roadworthy, such as:

Axle, Brake, Disk & Drum, Hub, Led Tail Light, Jockey Wheel, +Wheel & Tyres, Spring & Suspension, etc.

We pride ourselves on the quality and workmanship that goes into all of our trailers.

 

Black Jack Electric Caravan Jack 1600kg Trailer Jack Wiring Harness BJTJ-1001

Product form

Gone are the days of manually winding the jockey wheel to raise or lower the caravan or trailer. The Black... Read more

SKU: TR-BJTJ-1001

$640.00 Excl. VAT

 More payment options
    • Free shipping on all orders above $500
    • Try our parts on your cars and then decide
    • Available everyday customer service
    • Shipped today? Order within:
      00day
      04hours
      33minutes
      40seconds
    Description

    Description

    Gone are the days of manually winding the jockey wheel to raise or lower the caravan or trailer.

    The Black Jack™ Trailer Jack is the simplest, quietest and most advanced electric jack on the market today. Easy DIY installation and insanely simple RAISE\LOWER switch operation.

    Hugely popular in the USA, the Black Jack™ now comes complete with the all-weather cover, and the Black Jack Clamp™ (Australian Patent Pending) allowing uses the ability to easily bolted to the Caravan or Trailer A-Frame.

    For easier and faster deployment or retraction the Black Jack™ includes the Black Jack™ Folding Foot providing no more bending down to adjust the foot extension height position. Also included is the Black Jack™ Foot Pad giving improved stability on soft or unstable surfaces. 

    For easy installation, all Black Jacks are pre-wired to an Andersen plug.

    An installation wiring harness is also included with BJTJ- 1001. This harness includes a pre wired Andersen plug at one end and an inline fuse and battery terminals at the other end. The 5 meters of positive and negative Number 8 wires are encased in a protective cover.  



    BLACK JACK TRAILER JACK KEY FEATURES:
    • 1600 kg lifting capacity, more than enough muscle
    • Robust 58 mm outer post built for the toughest conditions (normal jockey wheels are only 48mm)
    • Massive 560 mm stroke that will lift the caravan clear of the tow vehicle hitch in any conditions
    • Built in level indicator to easily adjust the caravan level after you unhitch
    • Removable foot pad extension for travelling
    • Tough powder coated finish
    • Pre wired to an Andersen plug 
    • Emergency crank handle included as an emergency back up
    • Built in night light for operating after hours
    • 12 volt 28 amp DC power plugs directly to 12 volt battery
    • Free installation kit included, easy DIY Installation (with BJTJ – 1001)
    • Free all weather cover to keep the rain out
    • Total weight including Black Jack Clamp 17 kg
    BLACK JACK Clamp  KEY FEATURES:

    • 6 different chassis bolt hole positions so it fits any Caravan or trailer A-Frame in Australia (6 inch, 5 inch, 4 inch or 3 inch)
    • Multiple top hole positions so the Black Jack can be installed facing the front, the side or the rear of the Caravan or trailer. Your choice!
    • Panel recess so you can install over the top of existing wire fittings maximizing the options of where to install on the A-Frame.
    • Safety chain insert hole so you can hang safety chains on the Black Jack Clamp.
    • Upper support and a lower support brackets designed to eliminate any lateral movement that may be caused by uneven surfaces.
    • Easy bolt installation. No additional modifications, welding or tools are required.
    • Tough powder coated finish
    • Australian Patent Pending (No. 2020902039)
    • Registered Australian Design
    • Assembled in Australia supporting Australian Jobs

    Kit Includes：
    1x Black Jack Electric Trailer Jack
    1x Black Jack Clamp Patented 
    1x Black Jack Folding Foot 
    1x Black Jack Foot Pad 
    1x Black Jack All Weather Cover 
    1x Black Jack Upgraded Harness ( Ready to use)



    Specifications

    • Brand BLACK JACK
    • AMPS 28 amp
    • Warranty 3 Year
    • Product Type Jacks
    • Manufacturer Part Number BJTJ-1001
    • Maximum Load Capacity 1600 kg
    • OUTER POST DIAMETER 58MM
    • Unit Quantity 1
    • Overall Dimensions H 781 x W 216 x D 140mm

    We offer the very best in hot dipped galvanised trailers and trailer parts, whatever you are looking for we can do it!

     We manufacture and assemble quality trailers, which meet the Australian standard. All our trailer is Australian designed and all the parts are ADR approved. We storage all the big local brand trailer parts. This is the best one stop shop for your trailer and accessories. With the skills of our staff and the many options available, we can manufacture trailers to suit the individual needs of our customers.

     Towing Project can also offer a wide variety of trailer parts to ensure your trailer is roadworthy, such as:

    Axle, Brake, Disk & Drum, Hub, Led Tail Light, Jockey Wheel, +Wheel & Tyres, Spring & Suspension, etc.

    We pride ourselves on the quality and workmanship that goes into all of our trailers.

     

    Recently viewed products

    © 2025 Newcastle Parts Hub, Powered by Shopify

      • American Express
      • Apple Pay
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account